Shingle roofing is the backbone of residential roofing in Heth. Whether you're choosing architectural shingles for their dimensional look or three-tab shingles for budget-friendly coverage, the installation process is what determines how long they last. Heth Roofing & Maintenance follows manufacturer nailing specs and overlap requirements on every job.
We install every shingle roof to manufacturer specifications. That means 4-6 nails per shingle in the designated nailing zone, proper offset between courses, starter strips along the eave, and ridge cap shingles at every hip and ridge. When the manufacturer inspector shows up, your roof passes.
Our Shingle Roofing Process
Shingle Selection
Our estimator examines your current roofline, checks the condition of the underlayment and flashing, and presents shingle options with honest pricing. GAF, Owens Corning, CertainTeed — you pick.
Old Roof Removal
Old roof stripped to bare deck. We inspect the plywood or OSB sheathing for structural integrity, replace any compromised boards, and prep a clean, solid substrate for the new underlayment and shingles.
Waterproofing Layer
Synthetic underlayment across the full roof deck. Ice-and-water shield in valleys, along eaves, and around chimney flashing, pipe boots, and vent boots. New drip edge installed at every eave and rake. Step flashing and counter-flashing at all wall transitions.
Shingle Courses
Starter strips along the eave, then field courses of architectural shingles with manufacturer-specified offset and overlap. Each shingle nailed in the designated zone with 4-6 fasteners. Ridge cap shingles hand-nailed at every hip and ridge for a finished, watertight top.
What Heth Customers Say
"From the first phone call to the final walkthrough, everything was seamless. The team was courteous and efficient. Already recommended them to two friends."
"Best experience we've ever had with a home service company. On time, on budget, and the results exceeded what we expected. Truly top-notch."
"After getting several quotes, these guys stood out with their honesty and knowledge. No pressure, just straightforward advice and excellent workmanship."
Why Choose Heth Roofing & Maintenance for Shingle Roofing?
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.
Manufacturer-Certified Installers
GAF Master Elite, Owens Corning Preferred, CertainTeed SELECT ShingleMaster. Our certifications mean your manufacturer warranty is fully valid from day one.